All Products

These extenders buckle onto the existing breastplate straps, adding a couple of extra inches to each side to allow for your original breastplate to be one size larger. Includes one pair of extenders (2 pc.).

Extension strap is 3/4″ wide with buckle on one end.

Compatible with BLD’s Balance Assistance Harness (BAH) and Mobility Support Harness (MSH). Breastplate and harness not included.

Our Mobility Support Harness (MSH) and Balance Assistance Harness (BAH) are designed with replaceable parts. This is a replacement breastplate.

This item is in stock and ready to ship.

Replacement breast plate assembly for Mobility Support or Balance Assistance harness. 2″ wide breastplate comes complete with straps for attaching to the harness saddle.

Available in 4 width sizes:

• Small: 10″ for dogs with a 7-8″ wide chest (narrow breeds, and dogs under 50 pounds)
• Medium: 12″ for dogs with an 8-9″ wide chest
• Large: 14″ for dogs with a 10-11″ wide chest.
• Extra Large: 16″ for dogs with an 11-14″ wide chest.
• GIANT: dog’s width plus 4″ for dog’s 15″ or larger

The size refers to the length of the oval part of the breastplate. If your dog has a heavy chest build or has a very long back, order the next size larger.

Replacement thumb screw bolts for the Mobility Support Harness; the bolts hold the handle on the harness. This is the “new style” that screws into the female nuts on your harness support bars for harnesses made AFTER December 2015.

Choose the set of hardware you prefer (we will add Teflon plumbers tape to each bolt so it stays snug):

• Complete set: Includes a pair of round thumb screw bolts, a pair of tee thumb screw wing bolts, and 6 rubber washers. Just like the kit that came with your harness.
• Round Bolts: A pair of round knurled thumb screws plus washers.
• Wing Bolts: A pair of tee thumb screws plus washers.
• Locking Bolt Kit: for those who want to install a set of bolts that do not come unscrewed. Includes wing bolts (Tee thumb screws) and locking wingnuts. Installation requires tools including hex key (Allen wrench) and channel lock plyers and patience.

Select size based on the thickness of the support bar.

• Standard support bars use the standard size bolts (for 1/8″ thick support bars).
• TALL handles need the longer bolts to fit the heavy weight support bars (for 1/4″ thick support bars). See photos for details.

Tips for using your MSH handle:

• Always loosen the bolts before folding the handle. Failure to do so may ratchet the right side too tight and cause it to lock up.
• Always tighten the bolts after raising the handle. Not too tight, just a little snug.
• Place the rubber washer on the bolt before screwing into the harness handle.
• Keep a spare bolt handy at all times.
• If the bolts want to loosen too much, apply some Teflon plumbers tape to the threads of the bolts.
• Consult your harness Owner’s Manual for more info.
• All thumbs screws are standard “quarter twenty” thread bolts: SAE 1/4-20 

Replacement knobs for the Mobility Support Harness; the knobs hold the handle on the harness. This is the “old style” nut that screws ONTO the threaded posts on your harness support bars for harnesses made BEFORE December 2015.

• Set of 4 wing nuts for handle assembly. These wing nuts have self-locking nylon inserts to prevent the knobs from loosening.
• Set of 3 knobs – black knurled knobs approx. 1 inch in diameter, with rubber O-rings

(Be sure to use some teflon plumber’s tape on the threads! You can get this at any hardware store, sorry we don’t sell the tape.) 

We recommend keeping an extra wingnuts or knobs handy in case one gets lost.

TIP to keep your knobs on! Add some Teflon plumbers tape to the threaded post, as shown in last photo. You can get this at any hardware store. It increases the friction and helps keep the knobs tight. Just add a little of the tape to the screw part and then put the knob on the harness. Works like magic to keep it from loosening.

Refined simplicity – that’s the beauty of the Infini-Key. This innovative stainless steel key ring alleviates the struggle everyone has had with traditional, frustratingly snug split key rings. Great for keeping track of small accessories. Handy for attaching items to your harness, belt loop, back pack, or whatever! Made by Nite Ize (imported).

BLD Mobility Support Harness Users! Clip these onto your existing pull-rings to make it really easy to release the handle to fold with ONE HAND. *Order two if you need a pair to clip onto your pull-rings. Your MSH harness must have pull-rings to take advantage of this upgrade option.

• Holds more than a dozen keys easily and securely
• Unique, high quality stainless steel key ring that allows easy access and removal of keys – No more split rings
• Carabiner clip allows secure attachment and easy release to most loops, straps, backpacks, or second key rings
• Size: 2.49″ x 1.16″ x 0.22″ | 63.20mm x 29.55mm x 5.66mm
• Weight: 5g | 0.18oz

The simple design of Nite Ize Infini-Key not only keeps your multiple keys handy, it allows you to isolate and remove any one of them without having to struggle with a stubborn split key ring. Just slide the key you need to the narrowed top – the neck of the Infini-Key keeps your other keys from following – and unlock the simple carabiner clip to remove. The carabiner can also be used to attach the Infini-Key to a belt loop, backpack, or second key ring, keeping your keys secure and handy wherever you go.

Double-ended connectors for Ultimate Safety

SOLD OUT

NOT AVAIALABLE AT THIS TIME

Back up your gear! BLD’s Safety Connectors with our specialty Locking Carabiner snaps ensure your dog stays securely connected.

Walk your dog with peace of mind knowing that you have two points of attachment to keep your dog safe. These leather safety cords are a backup attachment for Houdini dogs who somehow wriggle their way out of their gear or shake loose from the leash or harness.

With a bolt snap on either end, simply clip one end to a collar or harness, and the other end to a leash, or any other gear. Designed for use with head halters, training collars, martingales, front clip harnesses, or any type of training tool as a fallback plan in case of a slipped collar or broken buckle, or failed leash snap. 

Made with our insanely strong and durable Brahma material (coated webbing), and has stainless steel bolt snaps on each end. 

• XS/Small: Simple, and strong! Approx. 7.5 inches (20 cm) long, is made from 3/8″ width skinny Brahma (sewn)
• Medium Regular: Heavy -duty. Approx. 11 inches (28 cm) long, is made from 1/2″ wide Brahma (made with screw posts)
  

Handcrafted in Colorado. Lifetime Warranty on materials and workmanship.

Beautiful double-braided leather Safety Connectors ensure your dog stays securely attached to their leash.

Walk your dog with peace of mind knowing that you have two points of attachment to keep your dog safe. These leather safety cords are a backup attachment for Houdini dogs who somehow wriggle their way out of their gear or shake loose from the leash or harness.

With a bolt snap on either end, simply clip one end to a collar or harness, and the other end to a leash, or any other gear. Designed for use with head halters, training collars, martingales, front clip harnesses, or any type of training tool as a fallback plan in case of a slipped collar or broken buckle, or failed leash snap. 

Size and Hardware

Tan leather has solid brass hardware Black has stainless steel hardware.

• Small: Approx. 7.5 inches (20 cm) long, is made from 3/8″ width leather and small hardware for medium to large dogs - MOST POPULAR!
• Medium: Approx. 9 inches (26 cm) long, is made from 1/2″ width leather and medium hardware for large to giant dogs

The Support Pull handle requires 4 points of contact to properly distribute pressure. These mouse ears are needed to alighn and stabilize the handle. 

Mouse ears mount to the saddle via the accessory D-rings. This kit installs easily with a screw driver.