All Products

BLD’s exclusive Banner Badge is designed for our BLD’s Mobility Support Harness (MSH).

• It’s a banner sign for your harness!
• Two-sided banner spans the rigid metal handlebar
• Clear and legible text with universally understood symbols
• Design is printed onto soft polyester fabric–colorfast and washable
• Hand sewn with durable elastic and metal side loops
• Easily attaches to your harness handle with Velcro straps
• Fits best on rigid metal handles over 4″ tall, and 8-10″ wide (for other handles, check out these patches)
• Patch is 2.5″ x 5″ (6.3 x 12.7 cm), with .75″ of elastic on each end, and includes 2 Velcro straps

BLD exclusive designs! We invented the “Banner Badge” concept! Designed and assembled by hand in Colorado, USA.

This product is the badge only; Harness and handle sold separately.

NOT FOR PETS. LEGITIMATE SERVICE / ASSISTANCE DOGS ONLY. WE WILL ONLY SELL THESE ITEMS TO PEOPLE WITH A MEDICALLY NECESSARY SERVICE ANIMAL. IT IS ILLEGAL TO IMPERSONATE A SERVICE DOG.

Banner Badge — service dog sign for harness handle

Our uniquely designed Banner Badge is made especially for our Mobility Support Harness handlebar.  Clear and legible designs are perfect for identifying a service animal and informing the public about your dog’s job.

These double-sided banners are visible from the front and back, and are visible even while the handle is folded. The banner is a 2-sided fabric ID patch with specially designed elastic loops to stretch tight on your handle bar. The patch size is 2.5” x 5” (6.35 x 12.7 cm). Use the included Velcro straps to attach the banner to a rigid mobility handle. Fits best on handlebars 8-10″ wide that are 4 inches or taller. Very easy to install and does NOT interfere with the function of the harness!. Hand wash as needed. Does not interfere with the harness or handle. *Not recommended for very short brace handles under 4” tall.

Design Options

Designs (CAPS indicate LARGEST TEXT on design):

• 101 SERVICE DOG (red medical symbol)
• 102 SERVICE DOG, Ignore me, I’m working (disabled and medical symbols)
• 103-A SERVICE DOG, DO NOT PET, Public Access Required by Law (red medical symbol) – NEW woven material
• 104 Balance and Medical Support ASSISTANCE DOG (blue disabled symbol)
• 105-A Mobility Assistance Dog (STOP sign) DO NOT PET/DISTRACT, do not separate dog from handler – NEW woven material
• 106- MOBILITY ASSISTANCE DOG

Need More? Save More? 
Get Pro Pricing on 6 or more identical items.

Installation Instructions

How do I install the banner badge on my handlebar?

It’s easy! Watch this helpful video to see how:

A pulling strap for forward momentum and wheelchair pulling.

Since pulling and bracing are 2 different mobility needs, we have developed a great way to allow our Mobility Support Harness (MSH) to serve as a combination pulling harness!

• Pull-strap clips onto the existing harness
• Adjustable length from 14-18″
• Can be made to a specific length–just let us know in the notes when you check out!
• Available in black or tan leather
• Also compatible with BLD’s Balance Assistance Harness (BAH)

A highly recommended accessory for our Mobility Support Harness. 

The pull-strap can be used anytime you need the dog to lean forward into the harness, such as for pulling, assistance with forward momentum, climbing stairs, walking up a hill, getting up from a seated position, and even pulling a wheelchair on occasion.

The pull strap (sometimes called a bridge handle) has stainless steel snaps on each end and clips to the d-ring on BLD’s Mobility Support Harness. Pulling pressure is directed to the breastplate on the harness. The strap length is adjustable so you can find just the right length for the most leverage. Overall length adjusts from 14-18″ long. If you need a different length, OR prefer a specific fixed length, just let us know in a note when you check out (no extra charge for longer length if needed!). Made from our fabulous black Latigo or Golden Tan bridle leather, the edges are beveled for a smooth comfortable feel. Hardware is stainless steel and chrome plated solid brass for a lifetime of durability. 

The dog will understand the difference between you pulling on the handle strap and pressure on the support handle: You want the dog to PULL into the pulling strap, and BRACE for the support handle on the Mobility Support Harness.

Accessory strap only. Harness not included.

If you do not need the complete harness, you may purchase the Mobility Support Harness saddle only here. Choose the support bars to accommodate the handle you will be using on the harness. Keep scrolling for more information below.

*This is the saddle only, not a complete harness. No straps or handles are included.

Made to order! Allow 2-3 weeks for creation. 

Please see the Mobility Support Harness™ listing for details about this item.

• The standard support bars accommodate handles heights of 8″ or less (the metal on the handlebar must be 1/8″ thick to fit)
• The tall support bars accommodate any size handle (these bars are heavy 1/4″ thick metal designed for tall handles over 9″)
• Pull-Rings are available for people with limited dexterity who have trouble grasping a small knob, pull-rings can be added to make it easier to operate the handle folding mechanism.
• Magnetic Latch option for those with very limited dexterity

Saddle size and support bars/handle mounts cannot be changed after the saddle is constructed.

Size

MSH Harness Size: 

Standard - For most dogs 60-110 pounds, with a girth size of 28-36 inches that are 21 inches or taller measured at the withers. Best choice for most German Shepherd Dogs and Belgians, retrievers, smaller Great Pyrenees, and larger standard poodles and doodles.
Intended for dogs 60 pounds or larger. 

Extra Large  - For most dogs 100-170 pounds, with a girth size of 34-42 inches that are 26″ or taller. Best choice for most Newfoundland dogs, large Great Pyrenees, Larger Bernese Mountain Dogs, larger Rottweilers, smaller Great Danes, etc.

Giant - For dogs that meet or exceed a minimum of 150 pounds, a girth of 40 and 12 inch width. Best choice for larger Great Danes, Mastiffs, etc. If not all three minimums are met, choose XL. 

We do have a XXL for dogs that fall between XL and giant size; this size is rare, and only available by custom order. It is the same price as a giant. All straps from the XL size fit the XXL saddle. Giant straps do not. 

The chart below can help you determine the harness size you need. Weight and girth measurement are the most important. 

ABSOLUTE MINMUM SIZE REQUIREMENT: This harness will NOT fit dogs that are smaller than the minimum recommended 45 pounds, 21inches tall, or with a girth size less than 28 inches.

Color

Harness color:

• Black: Solid black latigo leather is our standard offering. This leather wears beautifully over time, does not fade, and hides the appearance of scuffs and scratches
• London Tan: Gorgeous vegetable-tanned Bridle leather. Color and shades will vary; each part of harness may be a different shade. Tan leather naturally appears rustic and may show scuffs and wear over time; color may darken with use over time.

If you do not need the complete harness, you may purchase the Balance Assistance Harness™ saddle only. 

This is not a complete harness. No straps or handles are included. Please note that the saddle size and handle mounts cannot be changed after the saddle is constructed.

Made to order! Allow 2-3 weeks for creation. 

Please see the Balance Assistance Harness™ listing for details about this item.

Size

MSH Harness Size: 

Standard - For most dogs 60-110 pounds, with a girth size of 28-36 inches that are 21 inches or taller measured at the withers. Best choice for most German Shepherd Dogs and Belgians, retrievers, smaller Great Pyrenees, and larger standard poodles and doodles.
Intended for dogs 60 pounds or larger. 

Extra Large  - For most dogs 100-170 pounds, with a girth size of 34-42 inches that are 26″ or taller. Best choice for most Newfoundland dogs, large Great Pyrenees, Larger Bernese Mountain Dogs, larger Rottweilers, smaller Great Danes, etc.

Giant - For dogs that meet or exceed a minimum of 150 pounds, a girth of 40 and 12 inch width. Best choice for larger Great Danes, Mastiffs, etc. If not all three minimums are met, choose XL. 

We do have a XXL for dogs that fall between XL and giant size; this size is rare, and only available by custom order. It is the same price as a giant. All straps from the XL size fit the XXL saddle. Giant straps do not. 

Need help with sizing? Don’t hesitate to ask! Contact us. We’ll take a look at your dog’s measurements to be sure you get the right size (before or after you place your order).

The below chart can help you determine the harness size you need. Weight and girth measurement are the most important. 

ABSOLUTE MINMUM SIZE REQUIREMENT: This harness will NOT fit dogs that are smaller than the minimum recommended 45 pounds, 21inches tall, or with a girth size less than 28 inches.

Color

Harness color:

• Black: Solid black latigo leather is our standard offering. This leather wears beautifully over time, does not fade, and hides the appearance of scuffs and scratches
• London Tan (add $20): Gorgeous vegetable-tanned Bridle leather. Color and shades will vary; each part of harness may be a different shade. Tan leather naturally appears rustic and may show scuffs and wear over time; color may darken with use over time.

This is a replacement Rigid Support handle for the BLD Mobility Support Harness (MSH). We will need the handle height and dog’s width to make your new handle.

Click on the button below for measuring instructions:

Replacement Handle Measuring Instructions

*BLD’s MSH harnesses are made with interchangeable parts, and these parts will not work on any other harness.

If we have any questions about your order we’ll follow up with you to confirm.

Custom made to order! Allow 7-10 business days for creation. 

Please click on the button above to view instructions for how to measure for replacement Rigid Support handle.

Order a new Rigid Support handle to adapt a harness to a new user or a new dog, or to replace a damaged one. A Rigid Support handle is made from lightweight aluminum (adjustable height), includes a padded handle grip that is comfortable and easy to clean, and features reflective tape on sides of handlebar.

**Custom made to order. Allow 7-10 days for completion. We may follow up with you to confirm both the measurements and that your order will work on your harness!

Handle Height Options

MSH Rigid Metal Support Handle height: 

Height is the distance between the top of the harness saddle and the top of the handlebar. Our handles are adjustable so you can easily get the best height for you. Support Handle adjustment range is approximate as exact dimensions depend on the harness size and dog’s width. Width of the handle will match your dog’s actual width.

• 2-4” *Select this size if your dog’s withers are equal to or higher than your wrist measurement
• 3-6”
• 5-8.5”
• 9-11” TALL *Harness saddle MUST be made to accommodate this size: Support Bars on the harness saddle must be 1/4″ thick.

*The TALL size handle applies more torque and pressure to dog than shorter handles. Not recommended for most users or for any dog smaller than our recommended size. Consider the BAH if tall handle is required.

Handle Grip Options

Handle Grip:

• Standard straight handlebar (straight across)
• Ergonomic grip (z-shaped for more natural hand and arm position, allows your arm to stay closer to your body for comfort), indicate left or right hand

Measuring and Instructions

See the PDF for Replacement Rigid Support Handles for measuring instructions and details.

This measuring video covers measuring for handles starting here at 5:53.

Bold Sets

Bolts: 

Bolts hold the handle onto your harness (Replacement bolt sets are available):

• Complete set: Includes a pair of round cap bolts, a pair of wing cap bolts, and 6 rubber washers. Just like the kit that came with your harness
• Round Caps: A pair of round cap bolts plus washers
• Wing Caps: A pair of wing cap bolts plus washers

Replacement handlebar wrap kit for your Mobility Support Harness Rigid Support handlebar. Use to refresh tattered handles or to add extra circumference and padding to your handlebar. Kit includes one roll of padded bar tape (1 meter long) and a set of reflective tape to “finish” the edges of the tape for a clean, professional look.

We have sourced a brand new material that has superior performance, even for dogs that really beat up their handle!

• Replacement handlebar wrap/padding (one roll) plus reflective tape to finish the ends
• Works for the standard and/or ergonomic grip styles
• Refresh tattered handlebars, or add extra circumference and padding
• Extremely resistant to abrasion and tearing yet easy to clean
• Silky texture feels great and offers optimal comfort
• Flexes well for wrapping around handle bends
• See video below for instructions on re-wrapping your handlebar

Replacement handlebar wrap for Rigid Support handle on Mobility Support Harness. Works for both the standard or ergonomic grip styles.

Product specifics: Pro Bike Gear Race Control Handlebar Tape. Hi-End Microfiber Smart Silicone. Adhesive back. Made in Taiwan for Shimano, the Netherlands. Tape is 100mm long x 30mm wide x 2.5 mm thick.

Designed for bicycle handlebars (high end road bike racing, to be specific), is the best option we’ve found for our harness handles. Lightweight, durable, and easy to clean, plus it has a great texture and provides a comfortable grip.

Replacement Handlebar Wrap Kit includes one roll of padded gel tape and two pieces of reflective safety tape to finish the ends. Easy to install: Just wrap around handle bar while applying some tension. Cut off the excess with scissors and secure the end with a little electrical tape, then apply the reflective tape to the ends for a finished look. You can add an extra layer right over your existing handlebar wrap or peel off the old stuff and re-wrap with new.

How do I refurbish my handlebar?

Watch our instructional video to learn how to re-wrap your handlebar. Katrina will walk you through the process:

You're in the right place to order a new custom leather handle for your BLD harness!

BLD's leather handles  and fit our Balance Assistance Harness, Mobility Support Harness, and the Light Assistance Harness 2.0* made in 2024 or later. 

Attachment Style: Available with either a quick release latch or spring snap clip, depending on which handle you need to fit your harness. 

Flexible handles are made from double-layered 5/8″ wide leather and will become softer with time and use. These handles naturally drop down to the dog's back when not being held.

The Semi-Rigid Handles are reinforced to make them stiffer to hold their shape and provide increased feedback. Semi-Rigid are recommended for most users. Made to measure in any height/length.

Details and measuring instructions can be found in the "Measuring" tab above. Also, please see the Guide to New or Replacement Leather Handles PDF.

Information We’ll Need:

A simple, short, clip-on handle 

We’ve created this little clip-on handle for those that would like a simple grab handle added to the BAH, MSH, or LAH.

Most commonly used for pulling up from a seated position, or for occasional wheelchair pulling. 8″ overall length, with 5″ of triple-layered leather, creates approximately a 2-3″ handle.

(Will not fit BLD’s everyday working harness, the clips are too small for the D-rings.)

Made from layered, 5/8″ wide leather and stainless steel snaps just like BLD’s other leather harness handles. This grab handle can be used anytime you need the dog to pull with a quick tug, such as for climbing stairs, getting up from a seated position, and even pulling a wheelchair on occasion.

Stainless steel snaps are on each end and clip to the accessory D-rings on the BAH and MSH, or onto the top O-rings on the BAH and LAH.

Designed to fit only the indicated harnesses by Bold Lead Designs. Accessory strap only. Harness not included.