BLD’s Leash Hook Attachment is handmade in Colorado using a specially fabricated hook mounted to a stainless steel plate that is securely fastened to a sturdy nylon webbing and Velcro wrap. The inside of the attachment is lined with gripping material to keep it in place. A separate piece of grippy material is also included to add extra holding power or diameter to the tubing if needed.
The Hook itself is designed to pivot with the gravity of the leash so the leash does not come off accidentally, but can be lifted off at any time.
Easy to install with no tools required!
We’ve made the attachment as easy to mount to the wheelchair as we can, although some clients may need a friend to help with the initial installation.
The Leash Hook Attachment wraps around a part of the wheelchair with Velcro. It can be mounted to the tubing, frame, or around the armrest of a wheelchair or mobility scooter. Velcro doubles back onto the wrap to create a strong and secure mount.
When selecting the location to attach the hook, be sure to choose a part that is structurally sound, appropriately sturdy, will not interfere with the function of the device, and within easy reach of the user. Also, be sure the chosen location will not cause damage to the wheelchair should the leash be pulled or get caught on something. If using around a wide part of the wheelchair, such as an armrest, the Extender Wrap will be required.
Ideas to consider:
Using more than one scooter/wheelchair? Consider ordering a hook for each mobility device.
Some clients prefer to use a two hook system. You may prefer to have a hook to connect the end of the leash and a second hook to hold the rings that shorten the leash. This prevents accidentally removing the whole leash when lengthening the leash.
Measure the circumference around where you want to attach the hook. Select the orientation to match the part of the wheelchair you will attach it to (vertical or horizontal).
* Whatever leash you use, please be sure it is the right length; it should be minimal and short, without excess to drag or get caught on objects or in the wheels, and must have an O-ring to drop onto the hook. Please read the safety considerations in the Safety Note tab.
Standard Hook Attachment fits diameter of tube/frame up to 1.5″ (3.8 cm)
Circumference of up to 5″ (12.5 cm)
With extender wrap, Hook Attachment fits diameter up to 4″ (10 cm)
Circumference of up to 10″ (25 cm)
Wheelchair Leash Sizing:
Regular half-inch wide (12.7 mm) is recommended for most dogs and people as it’s sturdy for any size dog, yet not too heavy. If you like a wider, heavier leash and larger hardware, select the wider option. In leather, the wider option is 5/8″, and in Brahma it is 3/4.”
If you are interested in purchasing a Wheelchair Leash to use with the Hook Attachment, please click here!
These products are intended for use with fully trained service dogs/assistance dogs/pet dogs that have excellent leash manners. We’ve designed all of our Wheelchair Leash options to manually detach from the wheelchair in the event of an emergency situation. Why? Because it’s simply a smart idea!
Only you can determine if letting go of the leash and attaching it to your wheelchair is the right choice for you and your dog.
Attached leashes (fastened to a person, wheelchair, or other mobility device) are not safe for all dogs and/or users of wheelchair/mobility devices. Please choose your equipment wisely and use responsibly.
Do not use wheelchair leashes with an untrained dog. Not for dogs that pull on the leash. Wheelchair leashes must NOT be used with dogs that lunge or are difficult to control, as this could be very dangerous. Additionally, DO NOT USE FOR PULLING A WHEELCHAIR.
Please note: If your strength or dexterity is limited, you may need assistance from a friend to install the wheelchair attachment and make the initial adjustment to the leash. Once attached and adjusted, the leash will remain at the desired length and is easy to connect to and remove from the wheelchair.
We stand behind the quality of our products.
All Bold Lead Designs’ handcrafted leather & Brahma products that we make in our workshop are guaranteed against defects in materials and craftsmanship for life!
If your leather lead, Brahma lead, training equipment, or harness ever breaks or is damaged from regular use, simply contact Bold Lead Designs for a replacement or repair at no charge. There is no time limit. This is the best warranty in the industry.
If service is required, please see Warranty Claims & Repair Service below.
Warranty is limited to replacement or repair of covered product only, and does not cover things outside of our control such as chewing, neglect, misuse, normal wear, external trauma, or customer alterations. Bold Lead Designs reserves the right to determine if a repair or replacement is covered by our warranty. Items we don’t make in our workshop, such as accessories and consumable items, are excluded. Note: bldBASICS, any item sold as used or imperfect or marked with a star is excluded from this warranty or guarantee.
Limitation of Damages:
Guarantee/Warranty is limited to replacement or repair of product only. Bold Lead Designs, LLC, or its associates, cannot be responsible for any claims or liabilities beyond the scope of the guarantee. Chewing, neglect and misuse, customer alterations, external trauma, and items marked with a star void all warranties. No other warranties, expressed or implied, are made. User assumes all responsibility for proper and safe use of product and care of animal. Customer pays for shipping for warranty claims. This warranty is nontransferable.
Have a warranty issue? Need a repair or replacement?
Please contact us first so we can help determine the best way to get you taken care of!
If the product sustained damage under normal use, and is covered under warranty, we will make it right at no charge (just pay for shipping).
Non-warranty repairs and alterations may be available, even for chewing and external damage. Repair costs start at $5 plus shipping. We will provide an accurate quote upon assessing the damage.
What to do: Tell us what product you have and what the issue is. If you can, please email us photos of the damage so that we can determine the best solution (repair, replacement, or something else). Usually we will have you mail the item to us, in which case we ask that you send the item to us with a completed Warranty-Repair Form. Please download, fill it in, print, and include with your return.
All warranty claims and repairs must be accompanied by the form otherwise we won’t know what to do with your item when received. If you don’t have a printer, you may write out all the pertinent information on a paper and include it with the item. Customer is responsible for all related shipping costs.